Skip to content
Print
Full manualEvery section, as one document

VEX IQ Robotics Competition Level Up - Game Manual

Version 2.1 - Copyright 2026, Innovation First, Inc./ VEX Robotics, Inc.

Appendix A - Field Overview

An engineering specification drawing for VEX IQ Robotics Level Up showing the dimensions of a bean bag in inches. The length across the top is four inches, and the width along the side is three inches.

Bean Bag scoring object.

An engineering specification drawing for VEX IQ Robotics Level Up showing starting bean bag locations for VEX IQ Robotics Level Up. Measurements are in inches. The field is positioned with the blue pyramid goal in the bottom left. Measurements of the position of each bean bag from the left side are shown across the bottom of the field. They are: 6.50, 24.50, 30.50 , 36.50, 42.50, 48.50, 66.50, 73.00. Measurements of the position of each bean bag from the bottom of the field are marked along the right side, with the bottom right corner marked 0. The bean bag measurements are: 12.50, 18.50, 30.50, 42.50, 48.50, 54.50, 66.50,78.50, 84.50, 97.00.

Starting Bean Bag locations.

Engineering drawing titled Wall Structure and Floor Barrier (VEX IQ, Appendix A). Top: side elevation of the wall structure with horizontal spans of 26.00 and 27.00 inches and a 0.50-inch offset. Bottom left: top view of the field grid showing wall and barrier placement among colored goals and corner L1/L2/L3 zones, dimensioned in inches. Bottom right: cross-section detail of the floor barrier showing a 0.84-inch diameter tube, 6.25-inch and 0.75-inch heights, a 1.00-inch base, and a 16.5° angle.

Wall and barrier field elements.

Engineering drawing titled Pyramid Goal (VEX IQ, Appendix A). Top: top-down view of a stepped pyramid goal with three tiers labeled L1, L2, and L3 and a yellow octagonal target at the top; horizontal dimensions of 6.25, 8.50, 14.50, and 20.50 inches. Bottom: side view of the red stepped tiers with step heights of 2.50, 5.00, 8.00, and 10.00 inches.

Pyramid Goal.

Engineering drawing titled L4 Goal (VEX IQ, Appendix A). Top: side elevation of a yellow goal structure standing 24.00 inches tall above the field tiles. Bottom: top view of the octagonal goal, labeled L4 on its sides with diagonal hazard striping, measuring 7.00 by 7.00 inches with a 2.25-inch corner inset and 225° interior angles. All dimensions in inches.

L4 Goal.

Engineering drawing titled Goal Locations (VEX IQ Robotics Competition, Appendix A) showing a top-down view of the competition field grid. Blue, red, and yellow goal markers, octagonal goals, and yellow barrier walls are positioned across the grid, with corner scoring zones labeled L1, L2, and L3 in two opposite corners. Dimension lines along the bottom edge (0 to 73.00 in) and right edge (0 to 97.00 in) mark goal positions in inches.

Goal locations.

VEX Game Manuals Feedback Form

Something not working on this site? Let us know about broken links, pages that won’t load, display issues, or anything else that’s getting in your way.

What’s it about?

Have a question about a rule? This form is for website issues only, and rule questions sent here will not receive an answer. Ask in the official Q&A, where answers are official and visible to everyone. How the Q&A works

0 / 2000

By including your email address, you agree that VEX can email you if there are questions about your feedback.

Privacy Policy